Question 1

A drip loop's lowest point has a minimum vertical clearance of ____.

Accepted Answer

A)   9 ft (2.7 m) 
B)   10 ft (3.0 m) 
C)   11 ft (3.3 m) 
D)   12 ft (3.7 m) E) A) and D)
F) All of the above

Question 2

No secondary overcurrent protection is required for certain transformers 1000 volts, nominal, or less with currents of at least 9 amperes and a maximum primary overcurrent protection of ____.

Accepted Answer

A)   75%
B)   100%
C)   125%
D)   150%E) None of the above
F) B) and D)

Question 3

Service equipment in other than dwelling units shall be legibly marked in the field with the ____.

Accepted Answer

A)   average impedance
B)   minimum current
C)   maximum available fault current
D)   maximum average currentE) A) and B)
F) C) and D)

Question 4

Where the ungrounded supply conductors are larger than 1100 kcmil copper or 1750 kcmil aluminum, the supply-side bonding jumper shall have an area not less than ____ of the area of the largest ungrounded supply conductor or equivalent area for parallel supply conductors.

Accepted Answer

A)   10½%
B)   12½%
C)   15½%
D)   18½%E) All of the above
F) C) and D)

Question 5

According to the NEC , where a panelboard is supplied through a transformer, the overcurrent protection required by 408.36 shall be located on the ____ side of the transformer.

Accepted Answer

A)   top
B)   bottom
C)   primary
D)   secondaryE) C) and D)
F) None of the above

Exam 14: Services Feeders and Equipment

According to the NEC, where a panelboard is supplied through a transformer, the overcurrent protection required by 408.36 shall be located on the ____ side of the transformer.

Correct Answer
verified

A drip loop's lowest point has a minimum vertical clearance of ____.

Correct Answer
verified

Where the ungrounded supply conductors are larger than 1100 kcmil copper or 1750 kcmil aluminum, the supply-side bonding jumper shall have an area not less than ____ of the area of the largest ungrounded supply conductor or equivalent area for parallel supply conductors.

Correct Answer
verified

Service equipment in other than dwelling units shall be legibly marked in the field with the ____.

Correct Answer
verified

No secondary overcurrent protection is required for certain transformers 1000 volts, nominal, or less with currents of at least 9 amperes and a maximum primary overcurrent protection of ____.

Correct Answer
verified

Exam 14: Services Feeders and Equipment

According to the NEC , where a panelboard is supplied through a transformer, the overcurrent protection required by 408.36 shall be located on the ____ side of the transformer.

Correct AnswerverifiedShow Answer

A drip loop's lowest point has a minimum vertical clearance of ____.

Correct AnswerverifiedShow Answer

Where the ungrounded supply conductors are larger than 1100 kcmil copper or 1750 kcmil aluminum, the supply-side bonding jumper shall have an area not less than ____ of the area of the largest ungrounded supply conductor or equivalent area for parallel supply conductors.

Correct AnswerverifiedShow Answer

Service equipment in other than dwelling units shall be legibly marked in the field with the ____.

Correct AnswerverifiedShow Answer

No secondary overcurrent protection is required for certain transformers 1000 volts, nominal, or less with currents of at least 9 amperes and a maximum primary overcurrent protection of ____.

Correct AnswerverifiedShow Answer

According to the NEC, where a panelboard is supplied through a transformer, the overcurrent protection required by 408.36 shall be located on the ____ side of the transformer.

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified