Question 1

The communications port assigned to the serial to USB converter is nearly always COM5.

Accepted Answer

A) True 
 B)False

Question 2

The 9300-USBS kit comes with a standard USB A/B cable, the USB serial adapter, and a CD containing the USB drivers for the personal computer and a quick start card.

Accepted Answer

A) True 
 B)False

Question 3

The 9300-USBS adapter requires ____________________ USB driver(s) to be installed on the personal computer.

Accepted Answer

The answer of The 9300-USBS adapter requires ____________________ USB driver(s)...

Question 4

What screen is opened to verify communication has been established with the PAC?

Accepted Answer

To verify communicat...

Question 5

After the USB drivers for the 9300-USBS have been installed on the personal computer, a routine schedule should be established for reinstalling the drivers on a regular basis.

Accepted Answer

A) True 
 B)False  False

Question 6

What is the most common problem encountered when configuring the 9300-USBS driver?

Accepted Answer

The most common problem people...

Question 7

If auto configuration fails to find the controller, what are three checks that can be performed?

Accepted Answer

If auto configuration fails to find the ...

Question 8

When setting up a Rockwell Automation 9300-USBS USB to serial adapter, the driver must first be configured using RSLinx before installing the driver on the personal computer.

Accepted Answer

A) True 
 B)False

Question 9

With a direct, or point-to-point, connection, there are no nodes as this is not a network connection. Controllers using ____________________ communications typically default to node 01.

Accepted Answer

The answer of With a direct, or point-to-point, connection, there...

Question 10

After successfully configuring the serial adapter, the Configure Drivers window will show the driver as ____________________.

Accepted Answer

The answer of After successfully configuring the serial adapter, the...

Question 11

A Rockwell Automation 9300-USBS USB to serial adapter is used to communicate between a personal computer with a standard 9-pin D-shell serial port and a PAC with a standard ____________________ port.

Accepted Answer

serial
9-pin D-shell serial
9 pin D shell serial
9-pin D shell serial
9 pin D-shell serial

Question 12

In addition to the 9300-USBS adapter, what cable is necessary to connect between the 9300-USBS adapter and the 9-pin D-shell connector on the controller?

Accepted Answer

In addition to the 9300-USBS adapter, a ...

Question 13

If communications were established with the controller at one point but have currently been lost, what are three checks that could be performed?

Accepted Answer

If communications were established with ...

Question 14

After the first USB driver for the 9300-USBS has been installed, the 9300-USBS kit CD must be ejected and reinserted to continue installing all the necessary drivers.

Accepted Answer

A) True 
 B)False  False

Question 15

When configuring the 9300 USBS driver, the only entry that should be changed in the Configure RS-232 DF1 Devices window is the ____________________ entry.

Accepted Answer

Comm Port
COM port
c...

Exam 21: Configuring an Rslinx Serial Driver Using a Rockwell Automation 9300-Usbs Usb to Serial Adapter

The communications port assigned to the serial to USB converter is nearly always COM5.

Correct Answer
verified

The 9300-USBS kit comes with a standard USB A/B cable, the USB serial adapter, and a CD containing the USB drivers for the personal computer and a quick start card.

Correct Answer
verified

The 9300-USBS adapter requires ____________________ USB driver(s) to be installed on the personal computer.

Correct Answer
verified

What screen is opened to verify communication has been established with the PAC?

Correct Answer
verified
To verify communicat...
View Answer

After the USB drivers for the 9300-USBS have been installed on the personal computer, a routine schedule should be established for reinstalling the drivers on a regular basis.

Correct Answer
verified
False

What is the most common problem encountered when configuring the 9300-USBS driver?

Correct Answer
verified
The most common problem people...
View Answer

If auto configuration fails to find the controller, what are three checks that can be performed?

Correct Answer
verified
If auto configuration fails to find the ...
View Answer

When setting up a Rockwell Automation 9300-USBS USB to serial adapter, the driver must first be configured using RSLinx before installing the driver on the personal computer.

Correct Answer
verified

With a direct, or point-to-point, connection, there are no nodes as this is not a network connection. Controllers using ____________________ communications typically default to node 01.

Correct Answer
verified

After successfully configuring the serial adapter, the Configure Drivers window will show the driver as ____________________.

Correct Answer
verified

A Rockwell Automation 9300-USBS USB to serial adapter is used to communicate between a personal computer with a standard 9-pin D-shell serial port and a PAC with a standard ____________________ port.

Correct Answer
verified
serial 9-pin D-shell serial 9 pin D shell serial 9-pin D shell serial 9 pin D-shell serial

In addition to the 9300-USBS adapter, what cable is necessary to connect between the 9300-USBS adapter and the 9-pin D-shell connector on the controller?

Correct Answer
verified
In addition to the 9300-USBS adapter, a ...
View Answer

If communications were established with the controller at one point but have currently been lost, what are three checks that could be performed?

Correct Answer
verified
If communications were established with ...
View Answer

After the first USB driver for the 9300-USBS has been installed, the 9300-USBS kit CD must be ejected and reinserted to continue installing all the necessary drivers.

Correct Answer
verified
False

When configuring the 9300 USBS driver, the only entry that should be changed in the Configure RS-232 DF1 Devices window is the ____________________ entry.

Correct Answer
verified
Comm Port
COM port
c...
View Answer

Exam 21: Configuring an Rslinx Serial Driver Using a Rockwell Automation 9300-Usbs Usb to Serial Adapter

The communications port assigned to the serial to USB converter is nearly always COM5.

Correct AnswerverifiedShow Answer

The 9300-USBS kit comes with a standard USB A/B cable, the USB serial adapter, and a CD containing the USB drivers for the personal computer and a quick start card.

Correct AnswerverifiedShow Answer

The 9300-USBS adapter requires ____________________ USB driver(s) to be installed on the personal computer.

Correct AnswerverifiedShow Answer

What screen is opened to verify communication has been established with the PAC?

Correct AnswerverifiedTo verify communicat...View AnswerShow Answer

After the USB drivers for the 9300-USBS have been installed on the personal computer, a routine schedule should be established for reinstalling the drivers on a regular basis.

Correct AnswerverifiedFalse

What is the most common problem encountered when configuring the 9300-USBS driver?

Correct AnswerverifiedThe most common problem people...View AnswerShow Answer

If auto configuration fails to find the controller, what are three checks that can be performed?

Correct AnswerverifiedIf auto configuration fails to find the ...View AnswerShow Answer

When setting up a Rockwell Automation 9300-USBS USB to serial adapter, the driver must first be configured using RSLinx before installing the driver on the personal computer.

Correct AnswerverifiedShow Answer

With a direct, or point-to-point, connection, there are no nodes as this is not a network connection. Controllers using ____________________ communications typically default to node 01.

Correct AnswerverifiedShow Answer

After successfully configuring the serial adapter, the Configure Drivers window will show the driver as ____________________.

Correct AnswerverifiedShow Answer

A Rockwell Automation 9300-USBS USB to serial adapter is used to communicate between a personal computer with a standard 9-pin D-shell serial port and a PAC with a standard ____________________ port.

Correct Answerverifiedserial 9-pin D-shell serial 9 pin D shell serial 9-pin D shell serial 9 pin D-shell serial

In addition to the 9300-USBS adapter, what cable is necessary to connect between the 9300-USBS adapter and the 9-pin D-shell connector on the controller?

Correct AnswerverifiedIn addition to the 9300-USBS adapter, a ...View AnswerShow Answer

If communications were established with the controller at one point but have currently been lost, what are three checks that could be performed?

Correct AnswerverifiedIf communications were established with ...View AnswerShow Answer

After the first USB driver for the 9300-USBS has been installed, the 9300-USBS kit CD must be ejected and reinserted to continue installing all the necessary drivers.

Correct AnswerverifiedFalse

When configuring the 9300 USBS driver, the only entry that should be changed in the Configure RS-232 DF1 Devices window is the ____________________ entry.

Correct AnswerverifiedComm PortCOM portc...View AnswerShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
To verify communicat...
View Answer

Correct Answer
verified
False

Correct Answer
verified
The most common problem people...
View Answer

Correct Answer
verified
If auto configuration fails to find the ...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
serial 9-pin D-shell serial 9 pin D shell serial 9-pin D shell serial 9 pin D-shell serial

Correct Answer
verified
In addition to the 9300-USBS adapter, a ...
View Answer

Correct Answer
verified
If communications were established with ...
View Answer

Correct Answer
verified
False

Correct Answer
verified
Comm Port
COM port
c...
View Answer