FiltersDone

Question type

Essay

Multiple Choice

Short Answer

True False

Matching

Exam 8: Surveying and Linear Measurements

Show Answer

Share

---

All types

Filters

Study FlashcardsPractice ExamLearn

Question 1

Multiple Choice

Review LaterAdd Note

Review Later

Chains are made up of ______

A) High steel carbon
B) Galvanized mild steel
C) Copper coated iron
D) Iron

E) None of the above
F) B) and C)

Correct Answer

verified

Show Answer

Question 2

Multiple Choice

Review LaterAdd Note

Review Later

It is possible to set out angles of 0' to 3° with help of ……….cross staff.

A) French cross staff
B) Open cross staff
C) Adjustable cross staff
D) Simple cross staff

E) B) and D)
F) A) and C)

Correct Answer

verified

Show Answer

Question 3

Multiple Choice

Review LaterAdd Note

To mark position of station …………. is used.

It is possible to set out angles 45° or 90° with help of ……….cross staff.

Instrument for registering the number of revolutions of a wheel is _____

190°Determining the relative positions of points on above or beneath the surface of the earth by means of direct or indirect measurements of distance and direction and elevation is called as _________

What is required to transfer points to the ground, while chaining along the sloping ground?

Which of the following tape is not made?

What is provided at every meter in case of 20m and 30° chains?

……………… is used for large scale.

Instrument shaped like a watch and is carried in pocket or attached to one leg is _______

Which of the following is made in connection with the construction of streets, water supply systems, sewers?

The length of survey line measured with a 20 m chain was found to be 327 m. If the chain was 3cm too long. Calculate the true length of the line.

In which method measurements of distances are chiefly confined to the preliminary surveys and explorations where a surveyor is called upon to make a rough survey as quickly as possible?

A line joining apex of triangle to a fixed point on the opposite side is called…..

Which of the following is not among the methods of linear measurements?

Longest survey line passing through the center of the area to be surveyed is called as…..

Direct ranging is done when the two ends of the survey lines are _______

Type of surveying in which the shape of the earth taken into account is __________