Question 1

Identify the symbol that precedes all dimensions for circular features.

Accepted Answer

The diameter symbol ...

Question 2

Describe tabular dimensioning.

Accepted Answer

Tabular dimensioning is a form of rectan...

Question 3

A delta note refers to a triangle place on the print for reference, usually placed next to the dimension or feature it is referring to in the notes.

Accepted Answer

A) True 
 B)False

Question 4

This term means the limits of the radius tolerance zone must be tangent to the adjacent surfaces, and there can be no reversals in the contour.

Accepted Answer

The answer of This term means the limits of the...

Question 5

This is considered a theoretically exact size, location, profile, or orientation of a feature or point.

Accepted Answer

A)   actual size
B)   basic dimension
C)   true dimension
D)   none of the aboveE) C) and D)
F) All of the above

Question 6

Define chamfer and provide comprehensive information about how chamfers are dimensioned.

Accepted Answer

A chamfer is a slight surface angle used...

Question 7

What is a specified dimension?

Accepted Answer

A specified dimensio...

Question 8

____ can be made to show the desired end product with the outline of the forging shown in phantom lines at areas that require machining.

Accepted Answer

A)   Machining detail prints
B)   Casting detail prints
C)   Forging detail prints
D)   both a and c
E)   none of the aboveF) A) and B)
G) A) and E)

Question 9

The smallest dimensions are shown on the print ____ the object, with ____ the object.

Accepted Answer

A)   closest to; progressively smaller dimensions outward from
B)   closest to; progressively larger dimensions outward from
C)   farthest from; progressively smaller dimensions above
D)   farthest from; progressively larger dimensions above
E)   none of the aboveF) A) and D)
G) A) and B)

Question 10

____________________ notes are placed separate from the views and relate to the entire print.

Accepted Answer

The answer of ____________________ notes are placed separate from the...

Question 11

The draft associated with forging is never shown on the print.

Accepted Answer

A) True 
 B)False

Question 12

Waviness width, roughness width, flaw, roughness height, and roughness width cutoff are all characteristics of ____.

Accepted Answer

A)   casting surfaces
B)   surface finish characteristics
C)   machined surfaces
D)   both a and c
E)   none of the aboveF) B) and C)
G) C) and D)

Question 13

Maximum material condition is the condition of a part or feature when it contains ____.

Accepted Answer

A)   the least amount of material.
B)   an average amount of material.
C)   the most amount of vacant space.
D)   the most amount of material.
E)   none of the aboveF) D) and E)
G) A) and B)

Question 14

Define reference dimension and indicate how they are displayed on a print.

Accepted Answer

A reference dimension is used for inform...

Question 15

Describe unidirectional dimensioning.

Accepted Answer

Unidirectional dimensioning re...

Question 16

Define single limits and describe how single limits are shown on a print.

Accepted Answer

Single limits are used when the specifie...

Question 17

Keyseats are dimensioned in any view that does not clearly show their shape by width, depth, length, and location.

Accepted Answer

A) True 
 B)False

Question 18

Chart prints are used when a particular part or assembly has one or more dimensions that change depending on the specific application.

Accepted Answer

A) True 
 B)False

Question 19

These notes are placed separate from the views and relate to the entire print.

Accepted Answer

A)   Local notes
B)   General notes
C)   Specific notes
D)   Universal notes
E)   none of the aboveF) C) and D)
G) A) and C)

Question 20

What are specifications?

Accepted Answer

Any written information or instructions ...

Exam 8: Reading Dimensions

What is a specified dimension?

Correct AnswerverifiedA specified dimensio...View AnswerShow Answer

Identify the symbol that precedes all dimensions for circular features.

Correct AnswerverifiedThe diameter symbol ...View AnswerShow Answer

____ can be made to show the desired end product with the outline of the forging shown in phantom lines at areas that require machining.

Correct AnswerverifiedShow Answer

Maximum material condition is the condition of a part or feature when it contains ____.

Correct AnswerverifiedShow Answer

The draft associated with forging is never shown on the print.

Correct AnswerverifiedShow Answer

____________________ notes are placed separate from the views and relate to the entire print.

Correct AnswerverifiedShow Answer

Chart prints are used when a particular part or assembly has one or more dimensions that change depending on the specific application.

Correct AnswerverifiedShow Answer

Define reference dimension and indicate how they are displayed on a print.

Correct AnswerverifiedA reference dimension is used for inform...View AnswerShow Answer

What are specifications?

Correct AnswerverifiedAny written information or instructions ...View AnswerShow Answer

A delta note refers to a triangle place on the print for reference, usually placed next to the dimension or feature it is referring to in the notes.

Correct AnswerverifiedShow Answer

Describe tabular dimensioning.

Correct AnswerverifiedTabular dimensioning is a form of rectan...View AnswerShow Answer

This term means the limits of the radius tolerance zone must be tangent to the adjacent surfaces, and there can be no reversals in the contour.

Correct AnswerverifiedShow Answer

Keyseats are dimensioned in any view that does not clearly show their shape by width, depth, length, and location.

Correct AnswerverifiedShow Answer

Describe unidirectional dimensioning.

Correct AnswerverifiedUnidirectional dimensioning re...View AnswerShow Answer

The smallest dimensions are shown on the print ____ the object, with ____ the object.

Correct AnswerverifiedShow Answer

Define chamfer and provide comprehensive information about how chamfers are dimensioned.

Correct AnswerverifiedA chamfer is a slight surface angle used...View AnswerShow Answer

Define single limits and describe how single limits are shown on a print.

Correct AnswerverifiedSingle limits are used when the specifie...View AnswerShow Answer

Waviness width, roughness width, flaw, roughness height, and roughness width cutoff are all characteristics of ____.

Correct AnswerverifiedShow Answer

This is considered a theoretically exact size, location, profile, or orientation of a feature or point.

Correct AnswerverifiedShow Answer

These notes are placed separate from the views and relate to the entire print.

Correct AnswerverifiedShow Answer

Correct Answer
verified
A specified dimensio...
View Answer

Correct Answer
verified
The diameter symbol ...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
A reference dimension is used for inform...
View Answer

Correct Answer
verified
Any written information or instructions ...
View Answer

Correct Answer
verified

Correct Answer
verified
Tabular dimensioning is a form of rectan...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
Unidirectional dimensioning re...
View Answer

The smallest dimensions are shown on the print the object, with the object.

Correct Answer
verified

Correct Answer
verified
A chamfer is a slight surface angle used...
View Answer

Correct Answer
verified
Single limits are used when the specifie...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified