Question 1

Imaging plates may be disposed of by:

Accepted Answer

A)   placing in a trash receptacle.
B)   sending to the environmental protection agency (EP
A)  .
C)   a licensed disposal company.
D)   storing in barium sulfate.E) A) and B)
F) A) and C)

Question 2

Which one of the following is used to cool the reader?

Accepted Answer

A)   Air
B)   Water
C)   Oil
D)   LaserE) A) and D)
F) B) and C)

Question 3

Image orientation can be difficult because of a lack of ______ the cassette.

Accepted Answer

A)   markers indicating the tube side of
B)   identification blocker on
C)   both a and b
D)   neither a nor bE) A) and B)
F) None of the above

Question 4

The safest procedure for erasing cassettes is to erase them:

Accepted Answer

A)   after 24 hours.
B)   just before use.
C)   twice a day.
D)   twice a week.E) C) and D)
F) All of the above

Question 5

If cassette labels are worn or damaged, the connection of the imaging plate to the patient and exam will not be affected.

Accepted Answer

A) True 
 B)False

Question 6

Preventive maintenance is performed:

Accepted Answer

A)   daily.
B)   weekly.
C)   monthly.
D)   semiannually.E) C) and D)
F) B) and D)

Question 7

The purpose of a personal repeat rate log is to:

Accepted Answer

A)   provide analysis of repeat cost.
B)   prevent repeats.
C)   establish error trends.
D)   prove poor technologist performance.E) C) and D)
F) A) and C)

Question 8

On a weekly basis, a designated QC technologist may perform all of the following tests except:

Accepted Answer

A)   image acquisition testing with phantoms.
B)   cassette integrity with special standardized cassettes.
C)   recording and reporting all problems immediately.
D)   cleaning air intakes on the image plate reader.E) C) and D)
F) A) and D)

Question 9

Frequent and consistent oversight of digital equipment is necessary to avoid:

Accepted Answer

A)   increased cost.
B)   unnecessary patient exposure.
C)   quality images.
D)   QC.E) B) and C)
F) None of the above

Question 10

Reestablishing baseline values is the responsibility of the:

Accepted Answer

A)   radiation physicist.
B)   radiologist.
C)   technologist.
D)   service personnel.E) B) and C)
F) A) and D)

Exam 12: Quality Acceptance Testing Within Digital Projection Imaging

Reestablishing baseline values is the responsibility of the:

Correct Answer
verified

Frequent and consistent oversight of digital equipment is necessary to avoid:

Correct Answer
verified

The safest procedure for erasing cassettes is to erase them:

Correct Answer
verified

On a weekly basis, a designated QC technologist may perform all of the following tests except:

Correct Answer
verified

Imaging plates may be disposed of by:

Correct Answer
verified

The purpose of a personal repeat rate log is to:

Correct Answer
verified

If cassette labels are worn or damaged, the connection of the imaging plate to the patient and exam will not be affected.

Correct Answer
verified

Preventive maintenance is performed:

Correct Answer
verified

Image orientation can be difficult because of a lack of ______ the cassette.

Correct Answer
verified

Which one of the following is used to cool the reader?

Correct Answer
verified

Exam 12: Quality Acceptance Testing Within Digital Projection Imaging

Reestablishing baseline values is the responsibility of the:

Correct AnswerverifiedShow Answer

Frequent and consistent oversight of digital equipment is necessary to avoid:

Correct AnswerverifiedShow Answer

The safest procedure for erasing cassettes is to erase them:

Correct AnswerverifiedShow Answer

On a weekly basis, a designated QC technologist may perform all of the following tests except:

Correct AnswerverifiedShow Answer

Imaging plates may be disposed of by:

Correct AnswerverifiedShow Answer

The purpose of a personal repeat rate log is to:

Correct AnswerverifiedShow Answer

If cassette labels are worn or damaged, the connection of the imaging plate to the patient and exam will not be affected.

Correct AnswerverifiedShow Answer

Preventive maintenance is performed:

Correct AnswerverifiedShow Answer

Image orientation can be difficult because of a lack of ______ the cassette.

Correct AnswerverifiedShow Answer

Which one of the following is used to cool the reader?

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified